Detalhes dos Produtos
Descrição
- D-Tap (P-Tap) Power cable for the new Pocket 4K Camera from BMD
- Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, the polarity of our cable must be correct.There is a key on the 2 pin connector, please match the key to plug in, please don’t insert the 2 pin plug or d-tap connector inversely.
- Plug A: 2 pin female. Plug B: Standard male D-Tap.
- The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.
- The Min length is about 15inches (38cm). The Max length is about 31.5 inches (80cm).
