Detalhes dos Produtos
Fujifilm BC-W126S Charger for NP-W126/NP-W126S Rechargeable Lithium-Ion Battery
$65,99
Aprox R$ 355,69
- For NP-W126S Battery
- LED Indicator
(15 dias úteis a importação + prazo dos correios)
Informação adicional
Peso | 0.082 kg |
---|
Fale conosco:
[email protected]
Whatsapp: +55 (67) 98140-5230
$65,99
Aprox R$ 355,69
(15 dias úteis a importação + prazo dos correios)
Peso | 0.082 kg |
---|
$60,99
Aprox R$ 328,74Comprar
Custom made for B&H, the On-Stage PBPM-JBH Pop Blocker is designed specifically for Rode PodMic microphones and other similarly sized mics. Its 3″ pop filter effectively reduces plosives and excessive breath noise, while its design enables easy adjustment of the screen’s angle and proximity to your mic. The PBPM-JBH safely and securely attaches to your mic via a rubber-lined clamp. Durable aluminum construction ensures reliable operation session after session.
$60,99
Aprox R$ 328,74Comprar
$726,99
Aprox R$ 3.918,48Comprar
Experience the thrill of drone racing with the FPV Goggles V2 from DJI. Equip your drone with an optional DJI Air Unit and it can transmit live first-person footage to the FPV Goggles from up to miles away. It’s as if you’re piloting the drone from an imaginary cockpit. The goggles are engineered to receive a clean and steady signal via four antennas and either 2.4 or 5.8 GHz wireless signals.
Inside the googles the live footage is viewed via two built-in 2″ screens, each sporting a resolution of 1440 x 810. Playback of the 810p stream is meant to look smooth with the screens’ 144 Hz refresh rate and video transmission at 60 fps in High-Quality mode, or 120 fps in Low-Latency mode. The field of view is adjustable from 30 to 54° to optimize comfort and help piloting, and on a fully charged battery, you can have FPV fun for up to 110 minutes.
$726,99
Aprox R$ 3.918,48Comprar
$34,99
Aprox R$ 188,60Leia mais
Get your camera perfectly balanced on your gimbal with help from the 7 oz 2285 Counterweight for DJI Ronin-S and Zhiyun-Tech Gimbal Stabilizers from SmallRig. Designed for easy stacking, this counterweight has a 1/4″-20 screw on one side and a 1/4″-20 threaded hole on the other. It is compatible with DJI Ronin-S as well as with Zhiyun-Tech Crane and WEEBILL LAB series gimbals, to which it mounts via a separately available mounting plate or clamp.
$34,99
Aprox R$ 188,60Leia mais
$127,99
Aprox R$ 689,87Leia mais
The GoPro Media Mod for HERO9 Black is an external housing that outfits the camera with a built-in directional mic with wind suppression, 3.5mm mic port, micro-HDMI output, and two cold shoe mounts for attaching accessories. The weather-resistant Media Mod protectively covers the camera on all four sides while still providing access to the bottom mount, front and rear displays, and all key controls.
$127,99
Aprox R$ 689,87Leia mais
$490,99
Aprox R$ 2.646,44Leia mais
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 2.1 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328′. Firmware updates are obtainable on the Godox website.
$490,99
Aprox R$ 2.646,44Leia mais
$92,99
Aprox R$ 501,22Leia mais
The sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
$92,99
Aprox R$ 501,22Leia mais
Atendimento via WhatsApp:
Segunda à Sexta-Feira das 09h às 18h (Horário de Brasília).
© 2021 Brazilbox – Todos os Direitos Reservados. Tank Digital