Detalhes dos Produtos
Descrição
In the Box
- KIPON Lens Mount Adapter for Canon FD-Mount Lens to Leica L-Mount Camera
Fale conosco:
contato@brazilbox.us
Whatsapp: +55 (67) 98140-5230
$157,99
PIX - R$ 935,74 à vista
Ou 12x de R$ 92,79
Com
DISPONÍVEL POR ENCOMENDA (Aprox. 15 dias úteis)
$490,99
PIX - R$ 2.895,28 à vista
Ou 12x de R$ 287,14
Com
Leia mais
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 2.1 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328′. Firmware updates are obtainable on the Godox website.
$490,99
PIX - R$ 2.895,28 à vista
Ou 12x de R$ 287,14
Com
Leia mais
$9,99
PIX - R$ 64,49 à vista
Ou 12x de R$ 6,38
Com
Leia mais
The Sensei 55-52mm Step-Down Ring is a step-down ring permitting the use of 52mm threaded filters on a 55mm threaded lens. This black anodized metal ring provides a durable solution for using one size of filters with various sized lenses.
$9,99
PIX - R$ 64,49 à vista
Ou 12x de R$ 6,38
Com
Leia mais
$726,99
PIX - R$ 4.285,32 à vista
Ou 12x de R$ 425,01
Com
Adicionar ao carrinho
Experience the thrill of drone racing with the FPV Goggles V2 from DJI. Equip your drone with an optional DJI Air Unit and it can transmit live first-person footage to the FPV Goggles from up to miles away. It’s as if you’re piloting the drone from an imaginary cockpit. The goggles are engineered to receive a clean and steady signal via four antennas and either 2.4 or 5.8 GHz wireless signals.
Inside the googles the live footage is viewed via two built-in 2″ screens, each sporting a resolution of 1440 x 810. Playback of the 810p stream is meant to look smooth with the screens’ 144 Hz refresh rate and video transmission at 60 fps in High-Quality mode, or 120 fps in Low-Latency mode. The field of view is adjustable from 30 to 54° to optimize comfort and help piloting, and on a fully charged battery, you can have FPV fun for up to 110 minutes.
$726,99
PIX - R$ 4.285,32 à vista
Ou 12x de R$ 425,01
Com
Adicionar ao carrinho
$763,99
PIX - R$ 4.503,14 à vista
Ou 12x de R$ 446,61
Com
Adicionar ao carrinho
$763,99
PIX - R$ 4.503,14 à vista
Ou 12x de R$ 446,61
Com
Adicionar ao carrinho
$92,99
PIX - R$ 552,95 à vista
Ou 12x de R$ 54,83
Com
Leia mais
The sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
$92,99
PIX - R$ 552,95 à vista
Ou 12x de R$ 54,83
Com
Leia mais
$79,99
PIX - R$ 476,57 à vista
Ou 12x de R$ 47,25
Com
Leia mais
This Offset Plate Kit from SmallRig allows you to mount your Blackmagic Design Pocket Cinema Camera 6K or 4K on a handheld gimbal, allowing more room between the camera and gimbal arm. This adjustable plate fits onto the original gimbal plate using a quick release clamp, and the plate features a 1/4″-20 camera mounting screw.
The plate allows the camera to slide back and forth to add clearance as well as help with balance. Safety features include anti-twist pins so the camera doesn’t rotate and rubber pads to prevent scratching. The kit also includes a removable connector that is used to attach SmallRig’s Metabones support when using heavy lenses. Screws and an Allen wrench are also included.
$79,99
PIX - R$ 476,57 à vista
Ou 12x de R$ 47,25
Com
Leia mais
Atendimento via WhatsApp:
Segunda à Sexta-Feira das 09h às 18h (Horário de Brasília).
[instagram-feed]
© 2025 Brazilbox – Todos os Direitos Reservados. FPiloto.com.br