Detalhes dos Produtos
KIPON Lens Mount Adapter for Canon FD-Mount Lens to Leica L-Mount Camera
$157,99
DISPONÍVEL POR ENCOMENDA (Aprox. 15 dias úteis)
Descrição
In the Box
- KIPON Lens Mount Adapter for Canon FD-Mount Lens to Leica L-Mount Camera
Produtos Relacionados
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028- 【FOR DJI RS 2/RSC】SmallRig Sling Grip 3028 is specially designed for DJI RS 2/RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.
- 【180 DEGREE ADJUSTMENT】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.
- 【QUICK RELEASE CLAMP】The grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.
- 【ANTI-SLIP DESIGN】The silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.
- 【MULTIPLE MOUNTING POINTS】Multiple 1/4″-20 and ARRI 3/8″-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905.
DJI FPV Goggles V2
DJI FPV Goggles V2Experience the thrill of drone racing with the FPV Goggles V2 from DJI. Equip your drone with an optional DJI Air Unit and it can transmit live first-person footage to the FPV Goggles from up to miles away. It’s as if you’re piloting the drone from an imaginary cockpit. The goggles are engineered to receive a clean and steady signal via four antennas and either 2.4 or 5.8 GHz wireless signals.
Inside the googles the live footage is viewed via two built-in 2″ screens, each sporting a resolution of 1440 x 810. Playback of the 810p stream is meant to look smooth with the screens’ 144 Hz refresh rate and video transmission at 60 fps in High-Quality mode, or 120 fps in Low-Latency mode. The field of view is adjustable from 30 to 54° to optimize comfort and help piloting, and on a fully charged battery, you can have FPV fun for up to 110 minutes.
Additional Features
Sensei 48-58mm Filter Wrench (Set of 2)
Sensei 48-58mm Filter Wrench (Set of 2)The Sensei 48-58mm Filter Wrench (Set of 2) is a helpful tool for removing jammed or over-tightened filters from your lens. The squeeze-type design ensures comfort and grip for ease of use. This wrench is compatible with filters ranging from 48-58mm in diameter.
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4K
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4KPower your Blackmagic Pocket Cinema Camera 6K or 4K using a separately available battery plate with this 2.5mm DC Barrel to 2-Pin Power Cable from SmallRig. The cable features a right-angle 2.5mm DC barrel plug on one end that can plug into a SmallRig L-series battery plate. A 2-pin connector on the other end provides power to the camera. The cable measures 15.7″ in length.
Manfrotto 394 Low Profile Quick Release Adapter with 410PL Plate
Manfrotto 394 Low Profile Quick Release Adapter with 410PL PlateThe sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
Sigma Lens Hood for 18-35mm f/1.8 Art DC HSM Lens
Sigma Lens Hood for 18-35mm f/1.8 Art DC HSM LensPrevent unwanted stray light from entering your Sigma 18-35mm f/1.8 Art DC HSM lens with this dedicated Lens Hood from Sigma, which is manufactured to match the design and optics of your valuable glass. This petal-shaped hood features a ridged interior surface to further restrict unwanted light from reaching your lens and creating unwanted flare. Additionally, because the hood extends out from the front lens element, you get extra protection from accidental impact and the elements.
