Detalhes dos Produtos
Pelican PINPAK-TP TrekPak Pinpak / Pull Tab (10-Pack)
$15,99
Disponível por encomenda
Descrição
Use this 10-pack of PINPAK-TP TrekPak Pinpak / Pull Tabs from Pelican to connect your TrekPak dividers.
Produtos Relacionados
Sensei 52mm Screw-In Metal Lens Cap
Sensei 52mm Screw-In Metal Lens CapThe 52mm Screw-In Metal Lens Cap from Sensei is a spare or replacement lens cap to fit any lens with a 52mm filter thread. The metal construction of this lens cap provides maximum protection for your lens. Lens caps protect your lenses from scratches, fingerprints, and the elements when not in use. It’s always a good idea to have a spare lens cap in case you lose one while on vacation or assignment.
On-Stage PBPM-JBH Pop Blocker for Rode PodMic Microphone
On-Stage PBPM-JBH Pop Blocker for Rode PodMic MicrophoneCustom made for B&H, the On-Stage PBPM-JBH Pop Blocker is designed specifically for Rode PodMic microphones and other similarly sized mics. Its 3″ pop filter effectively reduces plosives and excessive breath noise, while its design enables easy adjustment of the screen’s angle and proximity to your mic. The PBPM-JBH safely and securely attaches to your mic via a rubber-lined clamp. Durable aluminum construction ensures reliable operation session after session.
Sensei 52-72mm Step-Up Ring
Sensei 52-72mm Step-Up RingThe Sensei 52-72mm Step-Up Ring permits the use of 72mm threaded filters on lenses with 52mm filter threads. It features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability.
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028- 【FOR DJI RS 2/RSC】SmallRig Sling Grip 3028 is specially designed for DJI RS 2/RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.
- 【180 DEGREE ADJUSTMENT】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.
- 【QUICK RELEASE CLAMP】The grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.
- 【ANTI-SLIP DESIGN】The silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.
- 【MULTIPLE MOUNTING POINTS】Multiple 1/4″-20 and ARRI 3/8″-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905.
Sensei 62-77mm Filter Wrench (Set of 2)
Sensei 62-77mm Filter Wrench (Set of 2)The Sensei 62-77mm Filter Wrench (Set of 2) is a helpful tool for removing jammed or over-tightened filters from your lens. The squeeze-type design ensures comfort and grip for ease of use. This wrench is compatible with filters ranging from 62-77mm in diameter.
Manfrotto 394 Low Profile Quick Release Adapter with 410PL Plate
Manfrotto 394 Low Profile Quick Release Adapter with 410PL PlateThe sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
