Detalhes dos Produtos
Pelican PINPAK-TP TrekPak Pinpak / Pull Tab (10-Pack)
$15,99
Disponível por encomenda
Descrição
Use this 10-pack of PINPAK-TP TrekPak Pinpak / Pull Tabs from Pelican to connect your TrekPak dividers.
Produtos Relacionados
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4K
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4KPower your Blackmagic Pocket Cinema Camera 6K or 4K using a separately available battery plate with this 2.5mm DC Barrel to 2-Pin Power Cable from SmallRig. The cable features a right-angle 2.5mm DC barrel plug on one end that can plug into a SmallRig L-series battery plate. A 2-pin connector on the other end provides power to the camera. The cable measures 15.7″ in length.
DJI FPV Goggles V2
DJI FPV Goggles V2Experience the thrill of drone racing with the FPV Goggles V2 from DJI. Equip your drone with an optional DJI Air Unit and it can transmit live first-person footage to the FPV Goggles from up to miles away. It’s as if you’re piloting the drone from an imaginary cockpit. The goggles are engineered to receive a clean and steady signal via four antennas and either 2.4 or 5.8 GHz wireless signals.
Inside the googles the live footage is viewed via two built-in 2″ screens, each sporting a resolution of 1440 x 810. Playback of the 810p stream is meant to look smooth with the screens’ 144 Hz refresh rate and video transmission at 60 fps in High-Quality mode, or 120 fps in Low-Latency mode. The field of view is adjustable from 30 to 54° to optimize comfort and help piloting, and on a fully charged battery, you can have FPV fun for up to 110 minutes.
Additional Features
Manfrotto 394 Low Profile Quick Release Adapter with 410PL Plate
Manfrotto 394 Low Profile Quick Release Adapter with 410PL PlateThe sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
On-Stage PBPM-JBH Pop Blocker for Rode PodMic Microphone
On-Stage PBPM-JBH Pop Blocker for Rode PodMic MicrophoneCustom made for B&H, the On-Stage PBPM-JBH Pop Blocker is designed specifically for Rode PodMic microphones and other similarly sized mics. Its 3″ pop filter effectively reduces plosives and excessive breath noise, while its design enables easy adjustment of the screen’s angle and proximity to your mic. The PBPM-JBH safely and securely attaches to your mic via a rubber-lined clamp. Durable aluminum construction ensures reliable operation session after session.
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028- 【FOR DJI RS 2/RSC】SmallRig Sling Grip 3028 is specially designed for DJI RS 2/RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.
- 【180 DEGREE ADJUSTMENT】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.
- 【QUICK RELEASE CLAMP】The grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.
- 【ANTI-SLIP DESIGN】The silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.
- 【MULTIPLE MOUNTING POINTS】Multiple 1/4″-20 and ARRI 3/8″-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905.
Impact ME-108P Monitor Mount Adapter
Impact ME-108P Monitor Mount AdapterAble to support large panels weighing up to 14 lb, the ME-108P Monitor Mount Adapter from Impact was designed for maximum flexibility in adjustment. The adapter is ideal for use in conventions, displays, public spaces, or for production teams viewing raw footage.
The adapter’s 4.7″ plate has standard 75 and 100mm taps for firm, safe, and secure mounting. Both the mounting plate and a 5/8″ receiver are attached to opposite ends of a double ball joint to allow them to move freely in any direction. The receiver is compatible with industry-standard light stands or other accessories with a 5/8″ stud or pin. Yet another handy feature is a repositionable ratcheting handle that allows the adapter to be securely and completely locked down, even in tight spaces.
