Detalhes dos Produtos
QSC MS-000758-01
$127,99
DISPONÍVEL POR ENCOMENDA (20 DIAS ÚTEIS + FRETE NO BRASIL)
Informação adicional
| Peso | 0,000 kg |
|---|
Produtos Relacionados
Sigma Lens Hood for 18-35mm f/1.8 Art DC HSM Lens
Sigma Lens Hood for 18-35mm f/1.8 Art DC HSM LensPrevent unwanted stray light from entering your Sigma 18-35mm f/1.8 Art DC HSM lens with this dedicated Lens Hood from Sigma, which is manufactured to match the design and optics of your valuable glass. This petal-shaped hood features a ridged interior surface to further restrict unwanted light from reaching your lens and creating unwanted flare. Additionally, because the hood extends out from the front lens element, you get extra protection from accidental impact and the elements.
SmallRig Offset Plate Kit for BMPCC 6K and 4K with Select Handheld Stabilizers (BSS2403)
SmallRig Offset Plate Kit for BMPCC 6K and 4K with Select Handheld Stabilizers (BSS2403)This Offset Plate Kit from SmallRig allows you to mount your Blackmagic Design Pocket Cinema Camera 6K or 4K on a handheld gimbal, allowing more room between the camera and gimbal arm. This adjustable plate fits onto the original gimbal plate using a quick release clamp, and the plate features a 1/4″-20 camera mounting screw.
The plate allows the camera to slide back and forth to add clearance as well as help with balance. Safety features include anti-twist pins so the camera doesn’t rotate and rubber pads to prevent scratching. The kit also includes a removable connector that is used to attach SmallRig’s Metabones support when using heavy lenses. Screws and an Allen wrench are also included.
DJI Ronin-S Universal Mount
DJI Ronin-S Universal MountThe DJI Ronin-S Universal Mount is designed to let you mount the Ronin-S on a car, jib, cable cam system, or other support. It accepts the gimbal head and can be mounted on a support that has 1/4″-20 mounting holes. The Universal Mount features two LEMO power ports and includes a long LEMO to D-Tap cable for powering the gimbal. With the gimbal attached, run the cable from the Universal Mount to the optional DJI Dual TB50 Battery Mount with batteries, and the Ronin-S will be up and running while mounted securely on your movable gear or vehicle.
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4K
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4KPower your Blackmagic Pocket Cinema Camera 6K or 4K using a separately available battery plate with this 2.5mm DC Barrel to 2-Pin Power Cable from SmallRig. The cable features a right-angle 2.5mm DC barrel plug on one end that can plug into a SmallRig L-series battery plate. A 2-pin connector on the other end provides power to the camera. The cable measures 15.7″ in length.
Manfrotto 394 Low Profile Quick Release Adapter with 410PL Plate
Manfrotto 394 Low Profile Quick Release Adapter with 410PL PlateThe sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer – 3028- 【FOR DJI RS 2/RSC】SmallRig Sling Grip 3028 is specially designed for DJI RS 2/RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.
- 【180 DEGREE ADJUSTMENT】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.
- 【QUICK RELEASE CLAMP】The grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.
- 【ANTI-SLIP DESIGN】The silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.
- 【MULTIPLE MOUNTING POINTS】Multiple 1/4″-20 and ARRI 3/8″-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905.
