Detalhes dos Produtos
Informação adicional
| Peso | 0.35000 kg |
|---|---|
| Dimensões | 7 × 19 × 11 cm |
Produtos Relacionados
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4K
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4KPower your Blackmagic Pocket Cinema Camera 6K or 4K using a separately available battery plate with this 2.5mm DC Barrel to 2-Pin Power Cable from SmallRig. The cable features a right-angle 2.5mm DC barrel plug on one end that can plug into a SmallRig L-series battery plate. A 2-pin connector on the other end provides power to the camera. The cable measures 15.7″ in length.
Sensei 48-58mm Filter Wrench (Set of 2)
Sensei 48-58mm Filter Wrench (Set of 2)The Sensei 48-58mm Filter Wrench (Set of 2) is a helpful tool for removing jammed or over-tightened filters from your lens. The squeeze-type design ensures comfort and grip for ease of use. This wrench is compatible with filters ranging from 48-58mm in diameter.
Sensei 55mm Screw-In Metal Lens Cap
Sensei 55mm Screw-In Metal Lens CapThe 55mm Screw-In Metal Lens Cap from Sensei is a spare or replacement lens cap to fit any lens with a 55mm filter thread. The metal construction of this lens cap provides maximum protection for your lens. Lens caps protect your lenses from scratches, fingerprints, and the elements when not in use. It’s always a good idea to have a spare lens cap in case you lose one while on vacation or assignment.
GoPro Media Mod for HERO9 Black
GoPro Media Mod for HERO9 BlackThe GoPro Media Mod for HERO9 Black is an external housing that outfits the camera with a built-in directional mic with wind suppression, 3.5mm mic port, micro-HDMI output, and two cold shoe mounts for attaching accessories. The weather-resistant Media Mod protectively covers the camera on all four sides while still providing access to the bottom mount, front and rear displays, and all key controls.
Manfrotto 394 Low Profile Quick Release Adapter with 410PL Plate
Manfrotto 394 Low Profile Quick Release Adapter with 410PL PlateThe sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
Godox AD200Pro TTL Pocket Flash Kit
Godox AD200Pro TTL Pocket Flash KitThe speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 2.1 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328′. Firmware updates are obtainable on the Godox website.
