Tilta Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K (Basic Kit, Tactical Gray)
Aprox R$ 1.743,36
- Formfitting Cage
- SSD Holder for Samsung T5
- Quick Release Top Handle
- 90° USB Type-C Cable
- 90° HDMI Adapter
1 em estoque (pode ser encomendado)
Just a cage alone may not be enough, even if it does have a weathered steel appearance, the Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K basic kit, from Tilta, features a full cage, an SSD holder for a Samsung T5 SSD (not included), and a QR top handle, all in the Tilta tactical gray finish. The kit also includes a 90° USB Type-C cable and 90° HDMI adapter.
The cage is built of multiple sections and you assemble it to provide protection around the top, bottom, and sides of your camera without interfering with its operation. Multiple 1/4″-20 and 3/8″-16 threaded mounting holes and three cold shoes are built into the cage, providing mounting points for accessories that won’t stress your camera’s body. The SSD holder mounts onto the cage and securely holds a Samsung T5 SSD (not included) for an off-board recording of your video. The top handle mounts quickly on your cage, providing an additional hand-holding point. The included cables help connect the SSD and provide video for an onboard monitor (not included).
Tilta Full Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K (Tactical Gray)
Featuring a tactical gray appearance, the Tilta Full Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K is a multiple-part formfitting cage that you assemble to protect your Blackmagic Pocket Cinema Camera, either the 4K or 6K version. Once the cage is assembled, it holds your camera securely via attachment points at the top and bottom.
The cage features multiple 1/4″-20 and 3/8″-16 threaded mounting holes for accessories. Three cold shoes also allow the mounting of accessories, providing a sturdy frame that won’t stress your camera’s body. The bottom plate features multiple mounting holes for attaching to a tripod or gimbal. The multiple holes allow you to fine-tune the balance for working with gimbals.
The cage works with both the 4K and 6K versions of the Blackmagic Design Pocket Cinema Camera as the horizontal and vertical dimensions of the camera are the same
Formfitting aluminum and stainless steel cage
Multiple 1/4″-20 and 3/8″-16 threaded mounting holes for accessory mounting
Three cold shoes are integrated into the cage for mounting accessories
Top and bottom mounting points help keep the camera secure in the cage and prevent twisting
Tilta Quick Release Top Handle for BMPCC 4K Cage (Tactical Gray)
Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight tactical gray Quick Release Top Handle from Tilta. The quick release handle’s features include two shoe mounts, a 15mm rod port, multiple 1/4″-20 and 3/8″-16 threads, and a 3/8″-16 thread with locating pins.
The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8″-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.
Tilta Samsung T5 SSD Holder for BMPCC 4K Cages (Tactical Gray)
Add a solid state drive to your Blackmagic Design Pocket Cine Camera 4K with this Tactical gray Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.
- Samsung T5 SSD
- Tilta Camera Cage for Blackmagic Pocket Camera 4K