Tilta HDMI Male to HDMI Female Cable for Panasonic GH Series Cages

The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 2.1 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.

The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328′. Firmware updates are obtainable on the Godox website.

This Offset Plate Kit from SmallRig allows you to mount your Blackmagic Design Pocket Cinema Camera 6K or 4K on a handheld gimbal, allowing more room between the camera and gimbal arm. This adjustable plate fits onto the original gimbal plate using a quick release clamp, and the plate features a 1/4″-20 camera mounting screw.

The plate allows the camera to slide back and forth to add clearance as well as help with balance. Safety features include anti-twist pins so the camera doesn’t rotate and rubber pads to prevent scratching. The kit also includes a removable connector that is used to attach SmallRig’s Metabones support when using heavy lenses. Screws and an Allen wrench are also included.