Detalhes dos Produtos
ZEAPON PS-E1 Motorized Panoramic Head Pan Tilt 1/4 3/8 Screw ball Head For DSLR
$244,99
DISPONÍVEL POR ENCOMENDA (20 dias úteis + Frete no Brasil)
Informação adicional
| Peso | 0,150 kg |
|---|
Produtos Relacionados
Manfrotto 394 Low Profile Quick Release Adapter with 410PL Plate
Manfrotto 394 Low Profile Quick Release Adapter with 410PL PlateThe sturdy Manfrotto 394 Low Profile Quick Release Adapter is an RC4 type quick release assembly system that comes with 1/4-20″ and 3/8″-16 capacity, both on the camera and tripod ends, and comes supplied with the 410PL (RC4) quick release plate. The RC4 quick release base also includes a horizontal and vertical bubble level.
DJI FPV Goggles V2
DJI FPV Goggles V2Experience the thrill of drone racing with the FPV Goggles V2 from DJI. Equip your drone with an optional DJI Air Unit and it can transmit live first-person footage to the FPV Goggles from up to miles away. It’s as if you’re piloting the drone from an imaginary cockpit. The goggles are engineered to receive a clean and steady signal via four antennas and either 2.4 or 5.8 GHz wireless signals.
Inside the googles the live footage is viewed via two built-in 2″ screens, each sporting a resolution of 1440 x 810. Playback of the 810p stream is meant to look smooth with the screens’ 144 Hz refresh rate and video transmission at 60 fps in High-Quality mode, or 120 fps in Low-Latency mode. The field of view is adjustable from 30 to 54° to optimize comfort and help piloting, and on a fully charged battery, you can have FPV fun for up to 110 minutes.
Additional Features
SmallRig Offset Plate Kit for BMPCC 6K and 4K with Select Handheld Stabilizers (BSS2403)
SmallRig Offset Plate Kit for BMPCC 6K and 4K with Select Handheld Stabilizers (BSS2403)This Offset Plate Kit from SmallRig allows you to mount your Blackmagic Design Pocket Cinema Camera 6K or 4K on a handheld gimbal, allowing more room between the camera and gimbal arm. This adjustable plate fits onto the original gimbal plate using a quick release clamp, and the plate features a 1/4″-20 camera mounting screw.
The plate allows the camera to slide back and forth to add clearance as well as help with balance. Safety features include anti-twist pins so the camera doesn’t rotate and rubber pads to prevent scratching. The kit also includes a removable connector that is used to attach SmallRig’s Metabones support when using heavy lenses. Screws and an Allen wrench are also included.
Sensei 48-58mm Filter Wrench (Set of 2)
Sensei 48-58mm Filter Wrench (Set of 2)The Sensei 48-58mm Filter Wrench (Set of 2) is a helpful tool for removing jammed or over-tightened filters from your lens. The squeeze-type design ensures comfort and grip for ease of use. This wrench is compatible with filters ranging from 48-58mm in diameter.
DJI Ronin-S Universal Mount
DJI Ronin-S Universal MountThe DJI Ronin-S Universal Mount is designed to let you mount the Ronin-S on a car, jib, cable cam system, or other support. It accepts the gimbal head and can be mounted on a support that has 1/4″-20 mounting holes. The Universal Mount features two LEMO power ports and includes a long LEMO to D-Tap cable for powering the gimbal. With the gimbal attached, run the cable from the Universal Mount to the optional DJI Dual TB50 Battery Mount with batteries, and the Ronin-S will be up and running while mounted securely on your movable gear or vehicle.
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4K
SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4KPower your Blackmagic Pocket Cinema Camera 6K or 4K using a separately available battery plate with this 2.5mm DC Barrel to 2-Pin Power Cable from SmallRig. The cable features a right-angle 2.5mm DC barrel plug on one end that can plug into a SmallRig L-series battery plate. A 2-pin connector on the other end provides power to the camera. The cable measures 15.7″ in length.
